Tools

Top 10 Best Portable Saw Table Reviews For You

Last Update:

You can trust our selection for Portable Saw Table Reviews. Because We have worked hard studying and analyzing 51999 reviews for Portable Saw Table and rating them. It was a difficult job to list only ten products for Portable Saw Table where thousands of them available online. I hope it will help you to take final decision for Best Portable Saw Table.

Best Portable Saw Table
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw9.8Buy on Amazon
2DEWALT 10-Inch Table Saw9.6Buy on Amazon
3SKIL 15 Amp 10 Inch Table Saw with Stand- TS6307-009.6Buy on Amazon
4SKIL 10 Inch Heavy Duty Worm Drive Table Saw with Stand - SPT99-119.6Buy on Amazon
5DEWALT Dado Throatplate for 10-Inch Portable Table Saw (DWE7402DI)9.2Buy on Amazon
6WORX WX051 Pegasus Folding Work Table & Sawhorse9.2Buy on Amazon
7DEWALT Table Saw Stand8.8Buy on Amazon
8TonGass Dado Throat Plate Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS DWE7492) - Made from Impact-Resistant PC/PBT Blend Material8.6Buy on Amazon
9DEWALT Table Saw Stand for Jobsite8.4Buy on Amazon
10Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence8.4Buy on Amazon

Comparison Chart for Best Portable Saw Table

Our team scanned 51999 reviews before putting any suggestions for the Portable Saw Table in this article.

Table Of Content:

1. Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs.
  • ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • DO IT YOURSELF.
  • ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip.

2. DEWALT 10-Inch Table Saw

  • Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual.
  • Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM.
  • Rolling stand designed for easy set up and breakdown with excellent stability
  • Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
  • Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

3. SKIL 15 Amp 10 Inch Table Saw with Stand- TS6307-00

  • RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast smooth, and accurate cuts.
  • INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
  • PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot.
  • 4×4 CUTTING CAPACITY – Cuts material up to 4×4 at 90 degrees
  • 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
  • DUST PORT ELBOW – Redirects dust to a container for easy cleanup

4. SKIL 10 Inch Heavy Duty Worm Drive Table Saw with Stand – SPT99-11

  • Legendary worm drive gearing with 3-5/8 inch depth of cut and 30-1/2 inch rip capacity
  • Precision rack and pinion fence system makes fence adjustments quickly and smoothly for accurate cuts.
  • Rugged rolling stand with 16 inch Wheels and easy-load handles delivers unsurpassed mobility
  • Dust port elbow contains debris to 1 area for clean-up
  • Outfeed and left support allow for larger cuts to be made by 1 person

5. DEWALT Dado Throatplate for 10-Inch Portable Table Saw (DWE7402DI)

  • Allows for use of stacked dado cutters
  • Can be used with DWE7490 and DWE7491 versions
  • For woodworking and building
  • Package Weight: 0.372 kilograms

6. WORX WX051 Pegasus Folding Work Table & Sawhorse

  • WORKTABLE & SAWHORSE] Holds up to 300 lbs.
  • CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse.
  • LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store
  • CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together.
  • DO IT YOURSELF.
  • STORAGE SHELF] On the bottom of the work Pegasus we’ve made a place to hold a power strip or supplies.
  • BUILT TO LAST] Made out of a dependable, molded ABS with steel supports and fittings.

7. DEWALT Table Saw Stand

  • Lightweight design weighs only 33lbs.
  • Heavy-duty kickstand allows the stand to balance upright for mobility and storage
  • Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading
  • Wide stand base and offset rear legs provide stability and support for material feed control
  • Folding legs with quick release levers collapse under the stand, minimizing overall size for transport.

8. TonGass Dado Throat Plate Compatible with DeWalt 10″ Portable Table Saw (DWE7490 DWE7491 DWE7491RS DWE7492) – Made from Impact-Resistant PC/PBT Blend Material

  • Ill-fitting dado throat plates can cause injury and equipment damage.
  • Please take note that the dado throat plate looks very similar to another throat plate model.
  • Compatible with DeWalt 10″ Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models).
  • And with dimensions of 13 1/2″ x 3 11/16″ x 7/16″, this throat plate is a universal fit for several 10″ portable job site/contractor table saws that have dado capabilities.
  • MADE FROM IMPACT-RESISTANT PC/PBT BLEND MATERIAL – This is no flimsy plastic.

9. DEWALT Table Saw Stand for Jobsite

  • Heavy-Duty tube steel construction provides the strength you need for safe operation
  • Upport bar hardware holes for secure fastening of saw to the stand
  • Lightweight; folds flat for easy handling, storage, and transport
  • Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw.

10. Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence

  • SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop.
  • CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal.
  • 0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
  • SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut.

Some Keys to Consider for Buying the Portable Saw Table


Picking the perfect product can be stressful. Between choosing the right model and considering all the important features, it can be hard to know where to start. But don't worry, by focusing on these factors you can select a quality product from hundreds of options. See below:

Product Feature:



When choosing a product, you don't need a million features. We look at the features that matter and choose the top 10 products based on that. So you can trust us to help you find the best product for you.

Brand Value:



Good brand names offer quality and satisfaction, so we picked these products from them. Cheap brands may not always be the best option when it comes to quality. In fact, often times they offer products that don't last as long as the more reputable brands.

Value of the Money:



Good isn't always cheap, and cheap isn't always bad. But that doesn't mean spending a fortune on a flashy but useless product is a good idea. We try to measure how much value you can get for your money before putting them on the list.

Customer Reviews:



When you're looking to buy a product online, customer reviews can be one of the most useful factors to consider. They give you an accurate portrayal of what the product is like, based on real-world use.

Product Rank:



Now, this is interesting! You don’t just need a good product, you need a product that is on trend and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.

Customer Rating:



Hundreds of customers before you have used this product and they all left ratings. This means that the product has been rated well by many people and is likely to provide a good service experience. So, take a look at these ratings before you make your purchase.

Join The Discussion