Tools

Top 10 Best Reciprocating Saw Blades For Cast Iron Based On Scores

Last Update:

Our team studied on 37296 reviews available online for Reciprocating Saw Blades For Cast Iron, chose the finest ones and prepared Reciprocating Saw Blades For Cast Iron Reviews for you. It was very difficult to shortlist the ideal Reciprocating Saw Blades For Cast Iron from thousands of products online. However, We tried to make sure that you get only the Best Reciprocating Saw Blades For Cast Iron from our suggestions. Check our listings-:

Best Reciprocating Saw Blades For Cast Iron
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1LENOX Tools Reciprocating Saw Blade9.8Buy on Amazon
2Milwaukee GIDDS2-2488111 9" Tungsten Carbide Sawzall Blades9.6Buy on Amazon
3LENOX Tools 21221B960GR Gold Power Arc Demolition Reciprocating Saw Blade9.6Buy on Amazon
43 Pack 9 inch 8 TPI Diablo Steel Demon Carbide Reciprocating Saw Blades for 3/16-9/16 Thick Metals Boron Steel Ultra High Strength Steel (UHSS) Cast Iron Stainless Steel9.4Buy on Amazon
5Bosch RCB9G-2 2-Piece 9 In. 30 Grit TPI Carbide for Cast Iron and Block Reciprocating Saw Blade9.4Buy on Amazon
6Milwaukee The Torch 9 in. Nitrus Carbide Cast Iron Reciprocating Saw Blade9.2Buy on Amazon
73 Pack 6 inch 8 TPI Diablo Steel Demon Carbide Reciprocating Saw Blades for 3/16-9/16 Thick Metals Boron Steel Ultra High Strength Steel (UHSS) Cast Iron Stainless Steel9Buy on Amazon
8BOSCH RCB8DG 1-Piece 8 In. Grit TPI Diamond for Cast Iron and Block Reciprocating Saw Blade8.4Buy on Amazon
9EZARC Carbide Reciprocating Saw Blade R678HM Endurance for Thick Metal8.2Buy on Amazon
10LENOX Reciprocating Saw Blade8.2Buy on Amazon

Comparison Chart for Best Reciprocating Saw Blades For Cast Iron

We’ve scanned 37296 reviews for you. If you are looking for the Reciprocating Saw Blades For Cast Iron than this review article may help you.

Table Of Content:

1. LENOX Tools Reciprocating Saw Blade

  • Each reciprocating saw blade features nickel-alloy diamond particles for sharpness that lasts longer
  • Narrow kerf design enables this saw blade to make thinner, faster cuts
  • Straight, clean cuts made by reciprocating saw blades are unlike the ragged cuts of bulky snap cutters.
  • Durable chrome-alloy backing steel provides extra stability
  • 8″ L x 3/4″ W
  • Each reciprocating saw blade features nickel-alloy diamond particles for sharpness that lasts longer
  • Narrow kerf design enables this saw blade to make thinner, faster cuts
  • Straight, clean cuts made by reciprocating saw blades are unlike the ragged cuts of bulky snap cutters.
  • Durable chrome-alloy backing steel provides extra stability
  • 8″ L x 3/4″ W

2. Milwaukee GIDDS2-2488111 9″ Tungsten Carbide Sawzall Blades

  • For crimping round metal pipe to create a male fitting end
  • Optimal handle span for maximum power and comfortable operating range
  • Crimps heavier gauge pipe
  • Tungsten carbide blades built for extremely tough materials
  • Designed to cut through hardwood flooring, cast iron, stainless steel, fiberglass materials, ceramic tile, stone, plaster, and more.
  • Measures 9 inches in length
  • 1/2-inch universal tang fits all Sawzalls
  • 5-year limited manufacturer’s warranty

3. LENOX Tools 21221B960GR Gold Power Arc Demolition Reciprocating Saw Blade

  • Delivers up to 2X longer life versus traditional straight LENOX reciprocating saw blades.
  • The aggressive curved blade design optimizes the blade’s angle of attack for faster cutting in a variety of materials.
  • T2 Technology and a precision-applied titanium coating help dissipate heat, extending the life of the blades.
  • Available for wood, metal, demolition, and extreme heavy metal cutting applications.
  • 10 tooth per inch blades are best for use with thick metals, metal demolition, fire and rescue.

4. 3 Pack 9 inch 8 TPI Diablo Steel Demon Carbide Reciprocating Saw Blades for 3/16-9/16 Thick Metals Boron Steel Ultra High Strength Steel (UHSS) Cast Iron Stainless Steel

  • Pack of 3 Ultra high strength quality, metal cutting reciprocating 8 TPI blades
  • Designed to precisely slice through a variety of tough metals like iron, boron steel, wood, & alloys
  • Each blade is Carbide tipped for cutting through the most challengiing of metals (3/16″ -9/16″ thick).
  • For Use in a wide range of cutting projets from DIY home repairs, auto shops to industrial uses
  • Protected by a 1 yr limited warranty

5. Bosch RCB9G-2 2-Piece 9 In. 30 Grit TPI Carbide for Cast Iron and Block Reciprocating Saw Blade

  • Carbide grit cutting edge
  • Designed for cutting plaster, tile, cinder block, brick, cast iron, pipe and other hard, abrasive materials.
  • 032 In. kerf for faster, cleaner cuts
  • 2 piece pack

6. Milwaukee The Torch 9 in. Nitrus Carbide Cast Iron Reciprocating Saw Blade

  • 3X longer life than standard carbide recip saw blades in cast iron
  • Made to cut thick metals: stainless steel, black pipe & angle iron
  • NITRUS CARBIDE eliminates tradeoff between life & speed of cut
  • 7TPI design for fast starts and smooth cuts
  • 25% more NITRUS CARBIDE per tooth

7. 3 Pack 6 inch 8 TPI Diablo Steel Demon Carbide Reciprocating Saw Blades for 3/16-9/16 Thick Metals Boron Steel Ultra High Strength Steel (UHSS) Cast Iron Stainless Steel

  • Pack of 3 ultra high strength quality, metal cutting reciprocating 8 TPI blades
  • Designed to precisely slice through a variety of tough metals like iron, boron steel, wood, & alloys
  • Each blade is Carbide tipped for cutting through the most challengiing of metals (3/16″ -9/16″ thick).
  • For Use in a wide range of cutting projects from DIY home repairs, auto shops to industrial uses
  • Protected by a 1 yr limited warranty

8. BOSCH RCB8DG 1-Piece 8 In. Grit TPI Diamond for Cast Iron and Block Reciprocating Saw Blade

  • Diamond Grit cutting edge for cutting cinder block, brick, cast iron, pipe and other abrasive materials.
  • Up to 3-times faster and 3-times longer life than carbide grit blades
  • Vacuum brazed diamond grit blade for heavy use

9. EZARC Carbide Reciprocating Saw Blade R678HM Endurance for Thick Metal

  • Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades
  • Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in demolition applications, e.
  • Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or hardened steels.
  • Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work.
  • Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in.

10. LENOX Reciprocating Saw Blade

  • Allows end user to flip blade around reducing amount of waster grit and maximizing cost per cut
  • Lasts 6X Longer
  • Diamond grit cutting edge and dual tangs provide longer life than standard carbide grit blades
  • Cuts 3X Faster
  • Narrow kerf edge removes less material for faster cutting

Reciprocating Saw Blades For Cast Iron Buying Guide


When it comes to buying a Reciprocating Saw Blades For Cast Iron, have you been stressed out by the thought of finding the perfect one? Between choosing a model and ensuring that you're getting a quality product, it can feel like a lot of pressure. But don't worry, we're here to help. By focusing on these factors, you can pick the Best Reciprocating Saw Blades For Cast Ironfor your needs.

Brand Value:


Although cheap brands may not always be the best option when it comes to quality, often times they offer products that don't last as long as the more reputable brands. So, we picked these products from good brand names that offer you quality and satisfaction.

Product Feature:


When choosing a Reciprocating Saw Blades For Cast Iron, you don't need a lot of features, but the useful ones. There are many similar products and we look at the features that matter most and choose the top 10 products based on that. So, you can trust us.

Customer Reviews:


Like ratings, customer reviews give you actual and trustworthy information about the product they used. It's one of the best factors to think these customer reviews when you want to buy a product from online.

Customer Rating:


The hundreds of customers using these products before you won’t say wrong, would they? These customer always left a rating after using it. That's mean better ratings mean better service experienced by a good number of people. So, we also see these customer rating for choosing the Reciprocating Saw Blades For Cast Iron.

Product Rank:


Not only do you need a great product, but you also need one that is on trend and growing in popularity. This serves two purposes. First, a growing number of users shows that the product is good. Second, more consumers should lead to better quality and after-sales service from the manufacturers.

Value of the Money:


You get what you pay for. But that doesn't mean that spending tons of money on a flashy but underserving product is a good idea. We try to measure how much value for the money you can get from your Reciprocating Saw Blades For Cast Iron before putting them on the list.

Join The Discussion