Tools

Top 10 Best Saw Blade For Cutting Vinyl Plank Flooring Based On Customer Ratings

Last Update:

Our team studied on 53928 reviews available online for Saw Blade For Cutting Vinyl Plank Flooring, chose the finest ones and prepared Saw Blade For Cutting Vinyl Plank Flooring Reviews for you. It was very difficult to shortlist the ideal Saw Blade For Cutting Vinyl Plank Flooring from thousands of products online. However, We tried to make sure that you get only the Best Saw Blade For Cutting Vinyl Plank Flooring from our suggestions. Check our listings-:

Best Saw Blade For Cutting Vinyl Plank Flooring
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1SKIL 3601-02 Flooring Saw with 36T Contractor Blade9.8Buy on Amazon
2IVY Classic 35056 Swift Cut 10" 200 Tooth Aluminum & Plastic Cutting Circular Saw Blade with 5/8" Arbor9.8Buy on Amazon
3DEWALT DW9053 5-3/8-Inch 80 Tooth Paneling and Vinyl Cutting Steel Saw Blade with 10 mm Arbor9.8Buy on Amazon
4IRWIN 10-Inch Miter Saw Blade9.6Buy on Amazon
5Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings9.2Buy on Amazon
6BOSCH T128BHM3 3 Pc. 3.62 In. 14 TPI Carbide Teeth T-Shank Jig Saw Blades for Laminates9Buy on Amazon
7MantisTol 8.9" (227mm)Pro LVT/VCT/LVP/PVC/WPC/Rigid Core Vinyl Plank Cutter LVP-230.Best Buy!8.8Buy on Amazon
8MANTISTOL 13" Pro Vinyl floor cutter LVT-330 for VCT8.6Buy on Amazon
9GALAX PRO 22000 OPM 1.5A Oscillating Multi Tool8.4Buy on Amazon
10BOSCH T503 3-Piece Hardwood/Laminate Flooring T-Shank Jig Saw Blade Set8.2Buy on Amazon

Comparison Chart for Best Saw Blade For Cutting Vinyl Plank Flooring

We’ve scanned 53928 reviews for you. If you are looking for the Saw Blade For Cutting Vinyl Plank Flooring than this review article may help you.

Table Of Content:

1. SKIL 3601-02 Flooring Saw with 36T Contractor Blade

  • Cuts solid, engineered and laminate flooring with ease
  • Makes cross, miter and rip cuts
  • Lightweight design for transport and use at any project location
  • Miter detents at 0, 22.5 and 45 degrees
  • Die-cast aluminum miter and rip fence

2. IVY Classic 35056 Swift Cut 10″ 200 Tooth Aluminum & Plastic Cutting Circular Saw Blade with 5/8″ Arbor

  • Steel blade designed for cutting light gauge aluminum, plastic and vinyl siding up to 1/8″ thick.
  • CAUTION: BLADE MUST ROTATE IN DIRECTION OF ARROWS
  • High carbon-alloy steel blade
  • Precision ground teeth with no set for smooth accurate cuts, Swift Cut (Registered Trademark).
  • Arbor: 5/8″

3. DEWALT DW9053 5-3/8-Inch 80 Tooth Paneling and Vinyl Cutting Steel Saw Blade with 10 mm Arbor

  • Tougher tungsten carbide stays sharper longer
  • Thin kerf for fast and smooth cutting action
  • All blades feature 5/8″ arbor with diamond knock-out
  • Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts
  • Ribbed heat vents allow blade to run cooler, reducing blade flexing and binding

4. IRWIN 10-Inch Miter Saw Blade

  • Precision-ground circular saw teeth for smooth, accurate cuts
  • Fully-hardened circular saw blade plate runs truer, longer
  • Heavy-gauge, high-carbon steel construction provides extended circular saw blade life
  • 180 teeth count with top/face grind
  • 10″ blade length with 5/8″ arbor and 0.09″ kerf
  • Precision-ground circular saw teeth for smooth, accurate cuts
  • Fully-hardened circular saw blade plate runs truer, longer
  • Heavy-gauge, high-carbon steel construction provides extended circular saw blade life
  • 180 teeth count with top/face grind
  • 10″ blade length with 5/8″ arbor and 0.09″ kerf

5. Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings

  • Product Type : Tools
  • Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank , Cemplank ), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick.
  • Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And Smooth Finish
  • Sturdy High-Quality Steel And Aluminum Construction

6. BOSCH T128BHM3 3 Pc. 3.62 In. 14 TPI Carbide Teeth T-Shank Jig Saw Blades for Laminates

  • Carbide brazing technology – delivers 10x life versus standard bi-metal blades
  • Advanced tooth design – provides clean cuts in difficult-to-cut, brittle materials on both sides of the cutting surface.
  • Thin blade kerf – reduces material extraction, reduces heat and adds to performance
  • 14 TPI – ensures extra-clean chip free cuts
  • Designed for high-pressure laminates – fine-tuned specifically to provide best performance in laminate.

7. MantisTol 8.9″ (227mm)Pro LVT/VCT/LVP/PVC/WPC/Rigid Core Vinyl Plank Cutter LVP-230.Best Buy!

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring.
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material.
  • Straight cut, Angle cut; ” L & 凵” cut and Lengthwise cut (Solve the installation of wall and corner).
  • 2mm thick 9” length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.
  • Blade Cutting Width: 227 mm /8.

8. MANTISTOL 13″ Pro Vinyl floor cutter LVT-330 for VCT

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring.
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material.
  • 13″ cutting width and 8mm cutting depth.
  • 2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.

9. GALAX PRO 22000 OPM 1.5A Oscillating Multi Tool

  • Powerful and durable: The 1.
  • Versatile application: This Oscillating multi tool is very suitable to saw, sanding, trim and cut a variety of materials including skirting boards, copper and plastic pipes, soft non-ferrous metals, plaster board, laminates, carpets and ceramic tiles.
  • Quick attachment changing: Compact tool body and ergonomic soft grip provides optimal handling and control of the tool while working in inaccessible or hard to reach places.
  • Use comfort and easy : Vibration control makes the multi-tool easy to manoeuvre over the work surface.
  • What you get: 1* Oscillating multi tool, 1* scraper blade for scraping away glue, 1* wood/plastic plunge blade for cutting, 1* metal blade for soft metal cutting, 1* semi circle plastic/wood saw blade, 1* triangular sanding pad, 6* sanding paper: 60 grit *2pcs/80 grit *2pcs/120 grit *2pcs for wood and metal sanding, 1* user manual.

10. BOSCH T503 3-Piece Hardwood/Laminate Flooring T-Shank Jig Saw Blade Set

  • Includes two T101BF clean for hardwood, and one T101AOF special for laminate
  • Bi-Metal construction for durability and long life
  • Blades are optimized for straight and curved cuts in hardwood and laminated flooring
  • 3 piece set

Factors to Think for Buying the Saw Blade For Cutting Vinyl Plank Flooring


The process of finding the perfect product can be daunting. You may feel like you're juggling between choices when it comes to buying the product in general, specifically regarding which model to choose. But don't worry, by focusing on these factors you can select a quality product from hundreds of options. Here's how:

Customer Rating:



Before you buy this product, read the reviews from hundreds of satisfied customers. These customers always leave ratings after using the product, so you can be sure that you're choosing a good product. Plus, these customers rate the product highly, so you know you're getting great service.

Customer Reviews:



The best way to determine if a product is worth buying is to read customer reviews. These reviews offer real feedback about the product and can be trusted for accurate information.

Brand Value:



Cheap brands may not always be the best option when it comes to quality, but they can be a great value if you're looking for something that lasts. We've picked these products from good brand names that offer you quality and satisfaction.

Product Feature:



You don't need loads of features to choose a product, but useful ones. There are many similar products and we look at the features that matter most and choose the top 10 products based on that. So, you can trust us.

Value of the Money:



You don't have to spend a lot of money to get a good product. Just because a product is flashy doesn't mean it's worth your money. We take the time to measure how much value you can get from a product before putting it on our list.

Seller Rank:



What if you could find a product that was both trendy and growing in sales? Not only would you have a good product, but you'd also have one that is in high demand. This would serve two purposes. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.

Join The Discussion