BISS

Top 10 Best Saw Blade For Plexiglass Based On Customer Ratings

Last Update:

You can trust our selection for Saw Blade For Plexiglass Reviews. Because We have worked hard studying and analyzing 53610 reviews for Saw Blade For Plexiglass and rating them. It was a difficult job to list only ten products for Saw Blade For Plexiglass where thousands of them available online. I hope it will help you to take final decision for Best Saw Blade For Plexiglass.

Best Saw Blade For Plexiglass
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1MASTEC 10-Inch 100T Carbide Tooth TCG for Aluminum Saw Blade with 5/8-Inch Arbor9.6Buy on Amazon
2Diablo by Freud DJT102BF5 3-5/8 in. 13 TPI Bi-Metal T-Shank Jig Saw Blades for Plexiglass (5-Pack)9.4Buy on Amazon
3BOSCH T101A3 3-Piece 4 In. 14 TPI Special for Plexiglas T-Shank Jig Saw Blades9.2Buy on Amazon
4IRWIN Tools Classic Series Steel Corded Circular Saw Blade9.2Buy on Amazon
5Freud 10 In 80 Tooth Plexiglass&Plastic Cutting Saw Blade 5/8 In Arbor LU94M0108.8Buy on Amazon
6Red Devil 1170 PLEXIGLASS Scoring Tool8.8Buy on Amazon
7BOSCH T102BF 3-Piece 2-5/8 In. 13 TPI Clean for Plexiglas Bi-Metal Jig Saw Blades8.8Buy on Amazon
8Irwin 11820ZR 6-1/2-Inch 140 Tooth TFG Plastic8.6Buy on Amazon
9DEWALT 6-1/2-Inch Circular Saw Blade for Paneling/Vinyl8.6Buy on Amazon
10IRWIN Tools MARATHON Vinyl Siding Corded Circular Saw Blade8.4Buy on Amazon

Comparison Chart for Best Saw Blade For Plexiglass

53610 reviews were considered when writing our recommendations for the Saw Blade For Plexiglass in this article.

Table Of Content:

1. MASTEC 10-Inch 100T Carbide Tooth TCG for Aluminum Saw Blade with 5/8-Inch Arbor

  • Specification】:10-inch 100 Carbide Teeth 5/8-inch arbor
  • Application】:Durable smooth cutting and clean cutting.
  • TCG Tooth】:Triple Chip Teeth blade ideal for cutting Aluminum,Plexiglass,Plastic,Non-ferrous Metals.
  • Machine use】:Widely used in Miter Saw,Circular Saw,Table Saw.
  • Good Service】:Please contact us if you have any questions about this saw blade.

2. Diablo by Freud DJT102BF5 3-5/8 in. 13 TPI Bi-Metal T-Shank Jig Saw Blades for Plexiglass (5-Pack)

  • Ultra-hardened cutting edge for up to 5x longer life than standard blades
  • Optimized blade design reduces heat for melt-free cuts
  • Perma-SHIELD non-stick coating for less heat and friction
  • T-shank design fits all combo and most U-shank jig saws
  • Maximum performance in cordless and corded jig saws

3. BOSCH T101A3 3-Piece 4 In. 14 TPI Special for Plexiglas T-Shank Jig Saw Blades

  • Engineered for precision cuts on plexiglas 5/64 In. to 3/4 In. thick
  • Ideal for fine and straight cuts
  • High Speed Steel construction for long life
  • 4 In. overall length, 2 3/4 In. working length
  • 5 piece pack
  • Fine and straight cuts in plexiglass 5/64″ to 3/4″
  • Ground Teeth and taper ground back
  • 3 pack

4. IRWIN Tools Classic Series Steel Corded Circular Saw Blade

  • Precision ground teeth for smooth, accurate cuts.
  • Corrosion-resistant coating helps prevent rusting. Heavy-gauge high-carbon steel for extended life.
  • Features a 5/8-Inch Universal Arbor.
  • 140 teeth per inch tooth count cuts smoothest and is ideal for cutting plywood, OSB, veneer, or plastic.

5. Freud 10 In 80 Tooth Plexiglass&Plastic Cutting Saw Blade 5/8 In Arbor LU94M010

  • Exclusive Freud TiCo Hi-Density Carbide with modified triple chip grind (MTCG) tooth design enables clean smooth cuts while eliminating melting.
  • Negative hook angle produces a superior finish without grabbing the material
  • Ideal material thickness: ╝” to 1-5/8″
  • Laser cut Anti-vibration vents drastically reduces vibration extending blade life
  • Recommended for plexiglass, plastics, chip board, plywood, and laminates, Imported

6. Red Devil 1170 PLEXIGLASS Scoring Tool

  • Fast and easy
  • Super-sharp steel blade
  • For Plexiglas, acrylic and plastic
  • Use to scribe Plexiglas and then snap at the cut line
  • Not for use with Lexan

7. BOSCH T102BF 3-Piece 2-5/8 In. 13 TPI Clean for Plexiglas Bi-Metal Jig Saw Blades

  • Designed for cutting Plexiglas 5/64 In. to 3/4 In. thick
  • Ideal for straight, clean cuts
  • Ground and taper back tooth design
  • Superior bi-metal longevity

8. Irwin 11820ZR 6-1/2-Inch 140 Tooth TFG Plastic

  • Precision ground teeth for smooth, accurate cuts
  • Fully Hardened plate runs truer longer
  • Heavy gauge high carbon steel for extended life

9. DEWALT 6-1/2-Inch Circular Saw Blade for Paneling/Vinyl

  • Tougher tungsten carbide of the circular saw blade stays sharper longer
  • Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts
  • Thin kerf for fast and smooth cutting action
  • Ribbed heat vents allow blade to run cooler, reducing blade flexing and binding
  • All blades feature 5/8-inch arbor with diamond knock-out

10. IRWIN Tools MARATHON Vinyl Siding Corded Circular Saw Blade

  • Circular saw blades are made with an optimized, symmetric, 60°-angle tooth design
  • Innovative heat vent and expansion slot designs
  • Fully heat-treated circular saw blade
  • Circular saw blades cut gutters, vinyl siding and PVC piping
  • 120 tooth count
  • Circular saw blades are made with an optimized, symmetric, 60°-angle tooth design
  • Innovative heat vent and expansion slot designs
  • Fully heat-treated circular saw blade
  • Circular saw blades cut gutters, vinyl siding and PVC piping
  • 120 tooth count

Some Factors to Consider for Choosing the Saw Blade For Plexiglass


When it comes to finding the perfect product, the process can be daunting. You may feel like you're juggling between choices: which model to choose, what features are important to you, what's the best price? But don't worry, by focusing on these factors you can select a quality product from hundreds of options. Let’s start below:

Value of the Money:



Just because something is cheap doesn't mean it's good. But that doesn't mean spending a lot of money on a flashy but not very good product is a good idea either. We try to measure how much value you can get for your money before putting them on our list.

Brand Value:



Although cheap brands may not always be the best option when it comes to quality, sometimes they offer products that are just as good as the more reputable brands. So, we picked these products from good brand names that offer you quality and satisfaction.

Customer Reviews:



Online customer reviews can be some of the most helpful tools when you're looking to buy a product. By reading actual customer reviews, you can get an idea of what the product is like and whether or not it's worth your money.

Product Feature:



We evaluate the features that matter most to you and compile a list of the top 10 products. You can trust us to help you find the best product for your needs.

Customer Rating:



Hundreds of customers have come before you and left ratings and reviews of this product. This means that if you buy it, you'll be experiencing what a good number of people have already enjoyed. So take a look at these customer ratings to see if this product is right for you.

Product Rank:



Interesting! Not just a good product, but one that is trendy and growing in sales. This serves two purposes. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.

Join The Discussion