Tools

Top 10 Best Saw For Cutting Steel Reviews With Scores

Last Update:

You can trust our selection for Saw For Cutting Steel Reviews. Because We have worked hard studying and analyzing 62398 reviews for Saw For Cutting Steel and rating them. It was a difficult job to list only ten products for Saw For Cutting Steel where thousands of them available online. I hope it will help you to take final decision for Best Saw For Cutting Steel.

Best Saw For Cutting Steel
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1General Tools 858 Pvc Hose9.6Buy on Amazon
2Evolution Power Tools 14BLADEST Steel Cutting Saw Blade9.6Buy on Amazon
3DEWALT DW3330 7-1/4-Inch Iron and Steel Cutting Segmented Saw Blade with 5/8-Inch and Diamond Knockout Arbor9.4Buy on Amazon
4Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade9.4Buy on Amazon
5Metal Cutting 7.25” Circular Saw – Cut Metal9.2Buy on Amazon
6Diablo D0748CF STEEL DEMON 7 1/4 inch 48 Teeth Metal and Stainless Steel cutting Saw Blade CERMET II Carbide Up to 5X Longer Life9Buy on Amazon
7Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade8.6Buy on Amazon
8Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade8.4Buy on Amazon
9Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade8.4Buy on Amazon
10Norske Tools NCSBP210 6-1/2 inch 48T Metal Cutting Saw Blade For Steel Roofing8.2Buy on Amazon

Comparison Chart for Best Saw For Cutting Steel

We found 62398 reviews when researching. We have considered users feedback on the Saw For Cutting Steel and our suggestions includes only the finest of them in this article.

Table Of Content:

1. General Tools 858 Pvc Hose

  • DURABLE- stainless steel 24” serrated cutting cable easily slices through pipe up to 8” in diameter.
  • VERSATILE- can cut pipes of a wide variety of sizes and doesn’t require any special adjustment to do so.
  • CUTS- PVC, PE and ABS pipe as well as flexible rubber, PVC, ABS and polyethylene tubing cleanly
  • WORKS IN CONFINED SPACES- it can cut pipes that are in tight spaces because it is essentially just a thin, sharp wire.
  • FITS VIRTUALLY ANYWHERE- Cable saw is great for pipes that are against walls, between rafters or anywhere else where a normal cutter will not fit.
  • COMFORT GRIP HANDLES- help provide leverage when cutting pipe, making this tool easy to use and control.

2. Evolution Power Tools 14BLADEST Steel Cutting Saw Blade

  • Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques.
  • All offer premium quality
  • Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.
  • 1600 RPM
  • 66 Carbide Teeth, .094-Inch Kerf
  • 1-Inch Arbor Size

3. DEWALT DW3330 7-1/4-Inch Iron and Steel Cutting Segmented Saw Blade with 5/8-Inch and Diamond Knockout Arbor

  • The product is 7-1/4″ Stl/iron blade
  • Easy to use
  • The product is manufactured in China
  • Precision sharpened teeth for fast, smooth cuts and longer life
  • Blade coating prevents rust and reduces friction
  • Thicker body provides increased durability in heavy-duty applications
  • Fully hardened steel body prevents blade warping and binding

4. Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications.
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).

5. Metal Cutting 7.25” Circular Saw – Cut Metal

  • DRY CUT – Evolution gives you the cleanest, fastest and most professional cuts through metal with virtually no heat or sparks! Dry cut technology achieves cool-to-the-touch, burr free and instantly workable cuts, unlike abrasives.
  • CARBIDE-TIPPED BLADE INCLUDED – Premium carbide-tipped 40-tooth TCT steel saw blade significantly outperforms abrasives.
  • BEVEL CUT 0-45 degrees – The Evolution metal cutting circular saw cuts accurate bevels up to 45 degree angle.
  • CUT VIEWING WINDOW – A tough glass window gives you clear visibility of your cutting line.
  • 3 YEAR WARRANTY – This heavy duty metal cutting saw is extremely robust and durable and backed by a 3-year warranty and friendly US-based customer service team.

6. Diablo D0748CF STEEL DEMON 7 1/4 inch 48 Teeth Metal and Stainless Steel cutting Saw Blade CERMET II Carbide Up to 5X Longer Life

  • Cermet II (Ceramic and Metallic) teeth deliver a more efficient and productive metal cutting solution through high heat tolerance and increased hardness for superior wear, fewer blade changes and up to 25X longer life versus standard grinding discs.
  • Up to 50X cooler cuts with a circular saw blade when compared to a grinding disc that increases temperature of steel by up to 500 degrees.
  • Up to 10X faster cuts with a circular saw blade for maximum productivity and efficiency, resulting in up to 60 seconds faster cuts in both metals and stainless steels versus standard grinding discs.
  • Triple Chip Cutting action reduces sparks and the possibility of needing “hot” permits
  • Advanced Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping the blade cool for straight, accurate cuts.

7. Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications.
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).
  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).

8. Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

  • Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
  • Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications.
  • Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
  • Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
  • Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).

9. Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

  • Very durable 8 in.
  • Cermet and carbide blend teeth cut metals; lasts 3x longer than a standard carbide blade
  • Laser-cut stabilizer vents trap noise and vibration; keeps blade cool during application
  • Triple chip metal cutting grind provides durability and burr-free cuts
  • Spark free blades are “hot work” compliant (may not need to obtain a hot work permit on jobsites depending on local laws).

10. Norske Tools NCSBP210 6-1/2 inch 48T Metal Cutting Saw Blade For Steel Roofing

  • 6-1/2 inch x 48 teeth
  • High performance cutting of steel roofing, metal siding, steel pipe, steel studs and more
  • 0° hook angle reduces overfeeding, jamming, tooth breakage and kickback
  • Modified triple chip grind (MTCG) allows for easier cutting
  • C6 Micro-grain Carbide tips

How We Pick the Saw For Cutting Steel - Buying Guide


Don't let the stress of finding the perfect Saw For Cutting Steel keep you up at night- focus on these key factors to make the best decision possible. Shopping for a product can be overwhelming, but don't worry, we're here to help. Narrow down your choices by considering these factors, and you'll be sure to find a quality product that you love.

Product Feature:


Don't worry if you're not sure which product is right for you- we've got you covered. We've compared the top 10 Best Saw For Cutting Steel based on what matters to you and we'll help you choose the right one.

Brand Value:


Cheap brands may not always be the best option when it comes to quality, but they do offer products that are more affordable. In fact, often times their products don't last as long as the more reputable brands. So, we picked these Saw For Cutting Steel from good brand names that offer you quality and satisfaction without breaking the bank.

Customer Reviews:


Customer reviews can be incredibly helpful when you're looking to buy a Saw For Cutting Steel online. By reading through customer reviews, you can get a sense of what people thought of the product they used. This can be incredibly helpful in making your final decision about what product to buy.

Product Rank:


Now, this is interesting! You don’t just need a good Saw For Cutting Steel, you need a product that is trendy and in demand. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.

Customer Rating:


Hundreds of customers before you have used this product and always left ratings. This means that better ratings mean better service experienced by many. So, we also look at customer ratings when choosing the Saw For Cutting Steel.

Value of the Money:


The saying "you get what you pay for" is often true, but that doesn't mean you can't find great products at a great price. We believe that you should get the most value for your money, so we only list products that we believe are worth the price.

Join The Discussion