Tools

Top 10 Best Saw For Laminate Flooring With Expert Recommendation

Last Update:

Our team studied on 51663 reviews available online for Saw For Laminate Flooring, chose the finest ones and prepared Saw For Laminate Flooring Reviews for you. It was very difficult to shortlist the ideal Saw For Laminate Flooring from thousands of products online. However, We tried to make sure that you get only the Best Saw For Laminate Flooring from our suggestions. Check our listings-:

Best Saw For Laminate Flooring
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Norske Tools NCSBP272 8-1/4 inch 60T Melamine Plus Saw Blade For Ultra-smooth Cutting of Melamine9.8Buy on Amazon
212X16 PCD LAMINATE FLOORING9.8Buy on Amazon
3SKIL 3601-02 Flooring Saw with 36T Contractor Blade9.6Buy on Amazon
4WEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring9.2Buy on Amazon
5BOSCH T503 3-Piece Hardwood/Laminate Flooring T-Shank Jig Saw Blade Set9.2Buy on Amazon
6Bosch DCB1072CD 10 In. 72 Tooth Edge Circular Saw Blade for Laminate9Buy on Amazon
77-1/4X8 PCD LAMINATE FLOORING9Buy on Amazon
8DEWALT DWA3193PCD Fiber Cement/Laminate Saw Blade8.8Buy on Amazon
9BOSCH T128BHM3 3 Pc. 3.62 In. 14 TPI Carbide Teeth T-Shank Jig Saw Blades for Laminates8.4Buy on Amazon
1010X12 PCD LAMINATE FLOORING8.2Buy on Amazon

Comparison Chart for Best Saw For Laminate Flooring

51663 reviews were considered when writing our recommendations for the Saw For Laminate Flooring in this article.

Table Of Content:

1. Norske Tools NCSBP272 8-1/4 inch 60T Melamine Plus Saw Blade For Ultra-smooth Cutting of Melamine

  • The ULTIMATE finishing blade; features special 35 degree high ATB tooth design for ultra-smooth cutting of melamine, laminate, hardwoods and laminate flooring.
  • C4 Micro-grain carbide tips precision sharpened on all sides
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation
  • For professional carbinet makers, trim carpenters and avid Do-It-Yourselfers

2. 12X16 PCD LAMINATE FLOORING

  • 12X16 PCD LAMINATE FLOORING
  • 12X16 PCD LAMINATE FLOORING
  • 12X16 PCD LAMINATE FLOORING
  • 12X16 PCD LAMINATE FLOORING
  • 12X16 PCD LAMINATE FLOORING

3. SKIL 3601-02 Flooring Saw with 36T Contractor Blade

  • Cuts solid, engineered and laminate flooring with ease
  • Makes cross, miter and rip cuts
  • Lightweight design for transport and use at any project location
  • Miter detents at 0, 22.5 and 45 degrees
  • Die-cast aluminum miter and rip fence

4. WEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring

  • Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM
  • Perfect for slicing through fiber cement board and laminate flooring
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear
  • Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws

5. BOSCH T503 3-Piece Hardwood/Laminate Flooring T-Shank Jig Saw Blade Set

  • Includes two T101BF clean for hardwood, and one T101AOF special for laminate
  • Bi-Metal construction for durability and long life
  • Blades are optimized for straight and curved cuts in hardwood and laminated flooring
  • 3 piece set

6. Bosch DCB1072CD 10 In. 72 Tooth Edge Circular Saw Blade for Laminate

  • Brute Carbide – an upgraded C3/C4 micrograin formulation for increased impact damage resistance and long life.
  • Triple chip grind tooth geometry – designed for delivering maximum performance and high quality of finishing in highly abrasive materials.
  • Special negative hook angle – eliminates chipping and extends blade life
  • Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts
  • Thinner kerf – provides faster cuts and less waste.

7. 7-1/4X8 PCD LAMINATE FLOORING

  • 7-1/4X8 PCD LAMINATE FLOORING
  • 7-1/4X8 PCD LAMINATE FLOORING
  • 7-1/4X8 PCD LAMINATE FLOORING
  • 7-1/4X8 PCD LAMINATE FLOORING
  • 7-1/4X8 PCD LAMINATE FLOORING

8. DEWALT DWA3193PCD Fiber Cement/Laminate Saw Blade

  • Featuring Diamond Tooth; synthetic polycrystalline diamond tipped teeth
  • Designed for cutting fiber cement and laminate/prefinished flooring
  • 7-1/4″ Diameter, 5/8″ Arbor

9. BOSCH T128BHM3 3 Pc. 3.62 In. 14 TPI Carbide Teeth T-Shank Jig Saw Blades for Laminates

  • Carbide brazing technology – delivers 10x life versus standard bi-metal blades
  • Advanced tooth design – provides clean cuts in difficult-to-cut, brittle materials on both sides of the cutting surface.
  • Thin blade kerf – reduces material extraction, reduces heat and adds to performance
  • 14 TPI – ensures extra-clean chip free cuts
  • Designed for high-pressure laminates – fine-tuned specifically to provide best performance in laminate.

10. 10X12 PCD LAMINATE FLOORING

  • 10X12 PCD LAMINATE FLOORING
  • 10X12 PCD LAMINATE FLOORING
  • 10X12 PCD LAMINATE FLOORING
  • 10X12 PCD LAMINATE FLOORING
  • 10X12 PCD LAMINATE FLOORING

Some Keys to Consider for Buying the Saw For Laminate Flooring


Picking the perfect product can be stressful. Between choosing the right model and considering all the important features, it can be hard to know where to start. But don't worry, by focusing on these factors you can select a quality product from hundreds of options. See below:

Product Feature:



When choosing a product, you don't need a million features. We look at the features that matter and choose the top 10 products based on that. So you can trust us to help you find the best product for you.

Brand Value:



Good brand names offer quality and satisfaction, so we picked these products from them. Cheap brands may not always be the best option when it comes to quality. In fact, often times they offer products that don't last as long as the more reputable brands.

Value of the Money:



Good isn't always cheap, and cheap isn't always bad. But that doesn't mean spending a fortune on a flashy but useless product is a good idea. We try to measure how much value you can get for your money before putting them on the list.

Customer Reviews:



When you're looking to buy a product online, customer reviews can be one of the most useful factors to consider. They give you an accurate portrayal of what the product is like, based on real-world use.

Product Rank:



Now, this is interesting! You don’t just need a good product, you need a product that is on trend and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.

Customer Rating:



Hundreds of customers before you have used this product and they all left ratings. This means that the product has been rated well by many people and is likely to provide a good service experience. So, take a look at these ratings before you make your purchase.

Join The Discussion