Tools

Top 10 Best Straight Edge For Circular Saw In [2022]

Last Update:

Our team studied on 45656 reviews available online for Straight Edge For Circular Saw, chose the finest ones and prepared Straight Edge For Circular Saw Reviews for you. It was very difficult to shortlist the ideal Straight Edge For Circular Saw from thousands of products online. However, We tried to make sure that you get only the Best Straight Edge For Circular Saw from our suggestions. Check our listings-:

Best Straight Edge For Circular Saw
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Bora NGX Saw Plate Includes 55" Non-Chip Strip That Elimates Tear Out9.4Buy on Amazon
2DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide9.4Buy on Amazon
3ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)9.2Buy on Amazon
4Bora 50" NGX Clamp Edge Extension9.2Buy on Amazon
5ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)9Buy on Amazon
6Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking8.8Buy on Amazon
7Kreg Straight Edge Guide-4 Ft8.8Buy on Amazon
8BORA 50” NGX Clamp Edge8.2Buy on Amazon
9Bora 100-Inch NGX Clamp Edge8.2Buy on Amazon
10BORA WTX Ruled Clamp Edge Saw Guide8.2Buy on Amazon

Comparison Chart for Best Straight Edge For Circular Saw

45656 number of user reviews were available online, which we scanned to find the Straight Edge For Circular Saw. Hopefully, our experts suggestions available in this article will help you find your ideal choice.

Table Of Content:

1. Bora NGX Saw Plate Includes 55″ Non-Chip Strip That Elimates Tear Out

  • Fixed Center Molded Channel Reduces Blade Offset And Guesswork
  • Self-Adhesive Non-Chip Strip Attaches To The Bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish.
  • Quick-Release Clamps Are Adjustable So Your Saw Goes On And Off The Plate Effortlessly
  • Aluminum Guide Rails Position Your Saw Accurately Every Time

2. DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 58” x 2.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling; Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory; When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm; T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop; Low profile and flat top easy on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut.
  • EASY TO USE: There are two clamps that hold the wood – a stationery clamp on the end with lever and a sliding clamp that moves along the rail; To adjust, pull the sliding clamp apart until you hear a click, adjust the clamp to the wood, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationary clamp has the handle in the upward position when adjusting and push the lever down to lock into place.

3. ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure.

4. Bora 50″ NGX Clamp Edge Extension

  • Fits into NGX Clamp edge saw guide to increase length by 50 inches
  • Quick set up
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Includes connectors
  • Adds 50-inches to your existing NGX clamp edge guide

5. ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure.

6. Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking

  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track.
  • LOCKED IN: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.
  • MAKE MEASURING EASY: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy.
  • SUITED FOR YOUR NEEDS: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches.
  • ADDITONAL ACCESSORIES: The BORA WTX Saw Guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide.
  • 100 INCHES OF CUTTING: With your purchase you will receive a 50″ WTX Clamp Edge and WTX 50″ Extension, connect the pieces together for 100 inches of straight cuts.

7. Kreg Straight Edge Guide-4 Ft

  • Crosscut and rip cut up to 4 feet (122cm) in sheet goods
  • Aluminum guide rail leads cuts precisely along a straight line
  • Cutline indicators help position cuts perfectly
  • Built-in clamping with GripMaxx secures rail to material
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers

8. BORA 50” NGX Clamp Edge

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge Is An Ideal Accessory For Accurately Cutting Wide Boards And Pieces Of Plywood That Are Too Big For A Table Saw.
  • Clamps Firmly: This Straight Edge Guide Has A Wide Rubberized Clamp Face To Ensure A Tight Non-Slip Grip That Won’T Leave Indentations And Is Easily Adjustable To Meet The Length Of Your Project.
  • Extreme Durability: Made Of Heavy-Gauge, Extruded Aluminum It Is Rigid Enough To Resist Bowing And Hold A Straight Edge, And Durable Enough To Withstand Repeated Use.
  • Use With Any Circular Saw: This Guide Is Compatible With Any Brand Of Circular Saw, Not Just Bora Tools.

9. Bora 100-Inch NGX Clamp Edge

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Use with circular saws, routers, Jig saws, and other portable power tools
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

10. BORA WTX Ruled Clamp Edge Saw Guide

  • TIME SAVER: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with a circular saw, jigsaw, or router.
  • FAST SET-UP: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting.
  • LONG CUTTING LENGTH: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws.
  • RULED STRAIGHT EDGE: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always the right size.
  • EXTREME DURABILITY: Made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.

Some Factors to Consider for Choosing the Straight Edge For Circular Saw


When it comes to finding the perfect product, the process can be daunting. You may feel like you're juggling between choices: which model to choose, what features are important to you, what's the best price? But don't worry, by focusing on these factors you can select a quality product from hundreds of options. Let’s start below:

Value of the Money:



Just because something is cheap doesn't mean it's good. But that doesn't mean spending a lot of money on a flashy but not very good product is a good idea either. We try to measure how much value you can get for your money before putting them on our list.

Brand Value:



Although cheap brands may not always be the best option when it comes to quality, sometimes they offer products that are just as good as the more reputable brands. So, we picked these products from good brand names that offer you quality and satisfaction.

Customer Reviews:



Online customer reviews can be some of the most helpful tools when you're looking to buy a product. By reading actual customer reviews, you can get an idea of what the product is like and whether or not it's worth your money.

Product Feature:



We evaluate the features that matter most to you and compile a list of the top 10 products. You can trust us to help you find the best product for your needs.

Customer Rating:



Hundreds of customers have come before you and left ratings and reviews of this product. This means that if you buy it, you'll be experiencing what a good number of people have already enjoyed. So take a look at these customer ratings to see if this product is right for you.

Product Rank:



Interesting! Not just a good product, but one that is trendy and growing in sales. This serves two purposes. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.

Join The Discussion